Feed the filament through the PTFE tube until it reaches the extruder.
For a step-by-step visual guide on unboxing and your very first setup steps, watch this overview:
To prepare your for its first print, you must first clear all internal shipping restraints and perform an initial calibration. The process typically involves unboxing, removing protective foam, and setting up the software interface. Initial Physical Setup
: If you have the Combo version, remove the AMS unit from inside the printer and take out any foam pieces under the build plate. Attach Accessories :
The easiest way to verify your setup is to print a pre-sliced file.
: Unscrew the three screws located next to the lead screws (usually marked with arrows or labels) to allow the bed to move.
Feed the filament through the PTFE tube until it reaches the extruder.
For a step-by-step visual guide on unboxing and your very first setup steps, watch this overview:
To prepare your for its first print, you must first clear all internal shipping restraints and perform an initial calibration. The process typically involves unboxing, removing protective foam, and setting up the software interface. Initial Physical Setup
: If you have the Combo version, remove the AMS unit from inside the printer and take out any foam pieces under the build plate. Attach Accessories :
The easiest way to verify your setup is to print a pre-sliced file.
: Unscrew the three screws located next to the lead screws (usually marked with arrows or labels) to allow the bed to move.
All success stories are from real Passion.io users — but results vary. These outcomes reflect individual effort, experience, and many personal factors. We don’t make earning claims, income claims, or guarantee results. Passion.io is a platform and education provider, not a “get rich quick” program. Any income examples are for illustration only. Your success depends on you.
© 2026 Pioneer Pulse
