Obo.pattern_stocking_3.1.zip Apr 2026

: Articulated "print-in-place" patterns typically do not require supports , as the joints are designed to bridge or have built-in tolerances.

: Once printed, carefully flex the piece to break any tiny "stiction" points in the joints. This will give it the "floppy" textile feel characteristic of the OBO (On-Body Object) or 3D-printed fabric series.

: PLA is the most common choice for these articulated models due to its rigidity and detail. OBO.Pattern_stocking_3.1.zip

: Use a layer height of 0.2mm or smaller to ensure the articulating joints function smoothly. 2. Printing Specifications

Based on the file naming convention, this appears to be a 3D printing pattern for a "floppy" or articulating textile-style stocking, likely designed by or a similar creator specializing in 3D-printed fabrics. 1. File Preparation : PLA is the most common choice for

: Import the .stl files from the OBO.Pattern_stocking_3.1.zip into your slicer (e.g., Bambu Studio, PrusaSlicer).

: A raft or brim is recommended if you have trouble with the small segments of the stocking pattern peeling during the print. 3. Assembly & Post-Processing Printing Specifications Based on the file naming convention,

: Ensure the flat side of the stocking pieces is placed face-down on the build plate.