|
|
|
|
|
|
: Verify that the PP 2 is connected to a standard Line-Level input and not a Phono input on your receiver. Phono Preamplifier PP 2 - HiFi Gear
Ensure the turntable's ground wire is securely attached to the PP 2 . Nad Phono Preamp Pp2 Manual
The is a compact, low-noise device designed to add a turntable to modern amplifiers or receivers that only have "Line-Level" inputs (like CD, AUX, or Tuner). It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges via separate inputs and a rear selector switch. 1. Setup & Installation : Verify that the PP 2 is connected
: Use RCA cables to connect the PP 2 Output to a Line-Level input (e.g., CD, AUX, Tuner) on your receiver. It supports both Moving Magnet (MM) and Moving
If you encounter issues, refer to the following common solutions: :
: If your turntable has a separate ground wire, secure it to the GND thumb screw on the back of the PP 2 to minimize hum.
|
|
|
|
|
|
|
|