: Access the controller's local web page by entering its IP address into a browser to configure basic network settings and security certificates. 3. Managing Images (MPA1.jpg)
: If using WIN-PAK, add the device as an "IP-based Controller" under the communication server settings.
: Connect via Power over Ethernet (PoE) or a 12VDC power supply. Wiring : Connect the Wiegand/OSDP reader to the reader port. Connect the door strike/lock to the relay output.
The following guide covers the setup and configuration of the MPA1 controller
Based on the technical documentation for the Honeywell MPA1 Single Door Edge Controller Go to product viewer dialog for this item.
In the management software, you can use images like MPA1.jpg to enhance the user interface:
: Access the controller's local web page by entering its IP address into a browser to configure basic network settings and security certificates. 3. Managing Images (MPA1.jpg)
: If using WIN-PAK, add the device as an "IP-based Controller" under the communication server settings.
: Connect via Power over Ethernet (PoE) or a 12VDC power supply. Wiring : Connect the Wiegand/OSDP reader to the reader port. Connect the door strike/lock to the relay output.
The following guide covers the setup and configuration of the MPA1 controller
Based on the technical documentation for the Honeywell MPA1 Single Door Edge Controller Go to product viewer dialog for this item.
In the management software, you can use images like MPA1.jpg to enhance the user interface:
