Harmadik.pkt Apr 2026

The first packet might time out due to ARP, but subsequent replies should be successful.

Ensure all connection dots in Packet Tracer are green. harmadik.pkt

2-4 PCs or Laptops distributed across two subnets. The first packet might time out due to

Copper Straight-Through cables for end devices to switches; Copper Straight-Through for switches to router interfaces. 2. Addressing Table Example configuration for two subnets: IP Address Subnet Mask Default Gateway Router0 192.168.1.1 255.255.255.0 Router0 192.168.2.1 255.255.255.0 PC0 192.168.1.10 255.255.255.0 192.168.1.1 PC1 192.168.2.10 255.255.255.0 192.168.2.1 3. Configuration Steps Router Setup Access the CLI and configure the gateway interfaces: Copper Straight-Through cables for end devices to switches;

The file (Hungarian for "third.pkt") is typically a Cisco Packet Tracer laboratory exercise used in Hungarian vocational or university networking courses. While the specific requirements vary by school, these labs generally focus on implementing basic routing, switching, and endpoint configuration.

Router> enable Router# configure terminal Router(config)# interface gigabitEthernet 0/0 Router(config-if)# ip address 192.168.1.1 255.255.255.0 Router(config-if)# no shutdown Router(config-if)# exit Router(config)# interface gigabitEthernet 0/1 Router(config-if)# ip address 192.168.2.1 255.255.255.0 Router(config-if)# no shutdown Use code with caution. Copied to clipboard Click on PC0 -> Desktop -> IP Configuration .

Enter the IP, Subnet Mask, and Default Gateway as specified in the table. Repeat for using its respective subnet values. 4. Verification