To connect your programmer (like RT809H, UFPI, or EasyJTAG) to the IRIS 32E3 motherboard, you need to solder wires to these specific points: Clock signal for data timing. CMD: Command signal for operations. D0: Data line (Data 0) for transfer. GND: Common ground. VCC (3.3V): Power for the eMMC controller. VCCQ (1.8V): Power for the eMMC interface.

⚠️ Always use short, high-quality wires to ensure stable data transmission during the read/write process. Download Links

Either use the TV's power supply or provide VCC/VCCQ via the programmer.