: Press the "Next" or "Start" button in the software.
Click to select the firmware file ( .bin or .abs format) you wish to upload. : Press the "Next" or "Start" button in the software
: If your PC lacks a physical serial port, you will need an adapter and its corresponding drivers. 3. How to Use the ALi Loader Select Port & File : Choose the correct
: Plug the RS-232 cable into both the PC and the receiver. Run Loader : Open the extracted loader software on your PC. Select Port & File : Choose the correct COM Port (usually COM1 or COM2). or similar inside the extracted folder.
) are usually compressed into .rar archives, you must first extract them.
: Look for a file named loader.exe , upgrade.exe , or similar inside the extracted folder. 2. Hardware Requirements
: Set the upgrade type to "allcode + bootloader" for a full flash.