: Use a 3-wire grounded extension cord. Ensure the gauge is heavy enough to prevent voltage drops and overheating (refer to the Delta Abrasive Belt Manual for specific gauge charts). 3. Operational Safety 6" Abrasive Belt Finishing Machine
Slide the table assembly onto the rod and secure it with the secondary socket head screw. Delta 52 611 Sander Manual
Maintain a minimum clearance of between the table and the sanding belt for safety. : Use a 3-wire grounded extension cord
: Clean unpainted surfaces (like the table) with a cloth moistened with kerosene to remove protective coatings. Table Assembly : Operational Safety 6" Abrasive Belt Finishing Machine Slide
: Overall height of 60", weighing roughly 200 lbs.
Insert the support rod into the base and tighten the socket head screw.
: Tilts 45° out (away from belt) and 20° in (toward belt).